Chapter 1

Introduction

Power Supply

Table 1-1 Cisco ASR 901 Router Power Supply Specifications

Specification

Value

 

 

Wire gauge for DC input power

16 AWG

connections

 

 

 

 

 

Power dissipation

A901-12C-F-D: 40W

 

A901-4C-F-D: 40W

 

A901-12C-FT-D: 50W

 

A901-4C-FT-D: 50W

 

 

 

The Cisco ASR 901 router uses two 3 pin connectors (part number 27-2030-01) for input to the power supply. The terminal block is part of the accessory kit (part number 53-3085-01/53-3295-0), which ships with the Cisco ASR 901 router.

The ground wire connects to a 2-hole plug, which connects to the corresponding mounting point.

With the connector installed in the chassis, the pins are numbered as 1,2, and 3, respectively.

Figure 1-4 Cisco ASR 901 Router—Power Supply Connector Pinouts

Table 1-2lists the pinout configurations for the connector, based on the power source.

Table 1-2 Power Supply Connector Pinouts (-24/-60 VDC Application)

Pin

1

2

3

Connector A

VDC (-24 to -60)

RTN

Chassis Ground

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

1-6

OL-23778-01

 

 

Page 16
Image 16
Cisco Systems ASR 901 manual Pin Connector a, Rtn

ASR 901 specifications

Cisco Systems ASR 901 is an advanced aggregation services router that is designed to meet the needs of service providers and enterprise networks. It offers a versatile platform suitable for various deployment scenarios ranging from mobile backhaul and broadband aggregation to IP edge routing. The ASR 901 is known for its compact size, energy efficiency, and robust performance, making it a preferred choice for operators looking to enhance their network infrastructure.

One of the main features of the Cisco ASR 901 is its small form factor, which facilitates installation in space-constrained environments. Its design allows for easy deployment in both indoor and outdoor settings, making it ideal for applications such as cell site backhaul and remote locations. The router supports a wide range of interfaces, including Ethernet and T1/E1, providing flexibility in connecting different network types.

The ASR 901 is built on Cisco's IOS XR software, ensuring a highly reliable and secure operating environment. This software is known for its scalability and robustness, providing operators with the ability to support large numbers of subscribers and high traffic volumes. The router also supports system redundancy features, ensuring continuous service availability and minimizing downtime.

In terms of performance, the Cisco ASR 901 delivers high throughput and low latency, which are crucial for delivering quality services like voice, video, and data. With its support for advanced network technologies such as MPLS and IPv6, the ASR 901 can effectively manage complex networking requirements while accommodating future growth.

Security is also a key consideration with the ASR 901. It includes features such as advanced encryption, access control lists, and intrusion prevention systems, aimed at protecting the integrity of network communications. Moreover, its support for Virtual LAN (VLAN) tagging and Quality of Service (QoS) mechanisms allows for efficient traffic management and prioritization, ensuring that critical applications receive the necessary bandwidth.

Furthermore, Cisco provides comprehensive management tools for the ASR 901, allowing network administrators to easily monitor and configure the router. Features like SNMP and NetFlow enable operators to gain insights into network performance and usage patterns, facilitating proactive management of their environments.

Overall, the Cisco Systems ASR 901 stands out as a powerful and flexible router, designed to meet the evolving demands of modern networks. Its combination of compact design, scalability, and advanced features positions it as an ideal solution for service providers and enterprises seeking reliable and efficient network solutions.