1Any pin not referenced is not connected.
Serial Cable CAB−449FC
This section presents the cable assembly and pinouts for the CAB−449FC serial cable.
The cable gender for this product (part number 72−0796−01) is Male DB−60 to Female DB−37, mode − DCE.
This cable is used in the following systems:the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500 series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards. This cable has a male DB−60 connector on the Cisco end and a female DB−37 connector on the network end.
EIA/TIA−449 DCE Cable Pinouts (DB−60 to DB−37)
The table below shows the EIA/TIA−449 DCE cable pinouts (DB−60 to DB−37).
Note: The arrows indicate signal direction:
∙−−−> indicates DTE to DCE
∙<−−− indicates DCE to DTE
60 |
|
|
|
|
| |
Pin1 | Signal | Description | Direction | 25 | Signal | |
J1−49 | Pin | |||||
|
|
|
| |||
|
|
|
|
| ||
J1−48 | MODE_1 | Shorting |
|
|
| |
| − | − | − | |||
|
|
| ||||
J1−46 | GND | group |
|
| Shield | |
Single | − | J2−1 | ||||
| Shield_GND | GND | ||||
|
|
|
|
| ||
|
|
|
|
|
| |
J1−28 |
|
|
|
|
| |
J1−27 | RxD/TxD+ | Twisted pair | <−−− | J2−4 | SD+ | |
|
|
|
| |||
|
|
|
|
|
| |
J1−13 | RxD/TxD− | no. 11 | <−−− | J2−22 | SD− | |
| ||||||
J1−14 | TxCE/TxC+ | Twisted pair | −−−> | J2−5 | ST+ | |
|
|
|
| |||
|
|
|
|
|
| |
J1−11 | TxCE/TxC− | no. 7 | −−−> | J2−23 | ST− | |
| ||||||
J1−12 | TxD/RxD+ | Twisted pair | −−−> | J2−6 | RD+ | |
|
|
|
| |||
|
|
|
|
|
| |
J1−1 | TxD/RxD− | no. 6 | −−−> | J2−24 | RD− | |
| ||||||
J1−2 | CTS/RTS+ | Twisted pair | <−−− | J2−7 | RS+ | |
|
|
|
| |||
|
|
|
|
|
| |
J1−24 | CTS/RTS− | no. 1 | <−−− | J2−25 | RS− | |
| ||||||
J1−23 | TxC/RxC+ | Twisted pair | −−−> | J2−8 | RT+ | |
|
|
|
| |||
|
|
|
|
|
| |
| TxC/RxC− | no. 9 | −−−> | J2−26 | RT− | |
|
|
