![](/images/new-backgrounds/1158899/15889911x1.webp)
New and Changed Information
Auto Profile Selection Enables Scan of Wireless Modes in
When you enable auto profile selection, the client adapter ignores the selected profile’s wireless mode setting and scans the wireless modes specified by all the profiles in the auto profile selection list for an available network. Using this method, the client does not need to disassociate nor change the current profile while looking for networks in other profiles.
ASTU Exit Option
The Exit option on the Aironet System Tray Utility (ASTU)
Windows Wireless Network Connection Icon Shows Unavailable Connection (Windows XP Only)
If your computer is running Windows XP and you configured your client adapter using ADU, the Windows Wireless Network Connection icon in the Windows system tray may be marked with a red X and show an unavailable connection even though a wireless connection exists. This condition is caused by a conflict between ADU and Windows XP’s wireless network settings. Simply ignore the Windows icon and use the ASTU icon to check the status of your client adapter’s wireless connection.
Supporting Documentation
The Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
New and Changed Information
EAP-FAST Enhancements
The following is a list of
•Support of additional EAP authentication methods
Version 3.0 of ADU supports three EAP methods in both the PAC auto provisioning phase and the
–
–EAP-GTC
–EAP-TLS
•PAC configuration and management screens
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 3.0
6 |
| |
|