Cisco Systems CB21AG and PI21AG

Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 3.0

OL-8338-01

Installing the Client Adapter Software

Figure 3 Setup Type Window

Step 20 Choose one of the following options and click Next:

Note To ensure compatibility among software components, Cisco recommends that you install the

client utilities and driver.

•Install Client Utilities and Driver—Installs the client adapter driver and client utilities.

•Install Driver Only—Installs only the client adapter driver. If you choose this option, clickNext

and go to Step32.

•Make Driver Installation Diskette(s)—Enables you to create driverinstallation diskettes that can

be used to install drivers using the Windows Device Manager.

Note If you choose one of the firsttwo options and a client adapter is not inserted into your computer,

the following message appears: “The device may not be present or could have been

ejected/unplugged from the system. Insert or reinsert it now.”Insert the client adapter and click

OK. If you proceed without the client adapter inserted, the installation continues, but the driver

installation is incomplete. You must manually install the driver later using the Update Device

Driver Wizard. See Chapter 9 of theCisco Aironet 802.11a/b/g Wireless LAN Client Adapters

(CB21AG and PI21AG) Installation and Configuration Guide for instructions.