Menu Items

nSETUP

LANGUAGE

Sets the display language for the menu screen.

INPUT SELECT

HDMI1/HDMI2

Select the input modes to be used for the PC/AV HDMI1 and HDMI2 input terminals.

HDMI DUAL

To use HDMI DUAL, select ON.

AUDIO SELECT

Selects the terminal used to input audio signals in each input mode.

When HDMI DUAL is used, the HDMI1 settings are applied.

AUDIO INPUT LEVEL

Selects the maximum audio input level of the audio input terminal.

BAUD RATE

Selects the communication speed used for RS-232C communication.

DisplayPort STREAM

When using a screen resolution of 3840 x 2160 (50Hz/60Hz) in the DisplayPort input terminal, select MST (Multi-stream). Images may not be displayed properly with some video card combinations.

nMONITOR

MONITOR

Select the installation direction of the monitor.

LANDSCAPE

Landscape orientation

PORTRAIT

Portrait orientation

If the monitor is in a portrait orientation and a Windows PC is connected, set “Orientation” to “Portrait (Flipped)” in the “Screen Resolution” settings.

If you are using a different operating system, refer to the manual for your operating system.

OFF IF NO OPERATION

Determines whether or not to set the monitor go into standby mode when no monitor button or RS-232C command operations are performed for over 4 hours.

nPbyP

PbyP MODE

Sets the display method.

OFF .........Displays one screen.

ON ...........Displays a main screen and a sub screen in a line.

*When using PbyP mode, set HDMI DUAL to OFF and DisplayPort STREAM to SST (Single Stream).

PbyP SOURCE

Select the input signal of the sub-screen in PbyP mode.

When the input mode is DisplayPort

HDMI1 or HDMI2

When the input mode is HDMI1

DisplayPort or HDMI2

When the input mode is HDMI2

DisplayPort or HDMI1

E20

Page 20
Image 20
Sharp PN-K321 operation manual Menu Items NSETUP, Nmonitor, NPbyP