Sharp PN-K321 operation manual Mounting Precautions

MOUNTING PRECAUTIONS

•This product is for use indoors.

•A mounting bracket compliant with VESA specifications is required.

•To install on a stand (commercially available) or on a wall, or to remove or move the monitor, consult your dealer.

•Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility

for accidents or injuries caused by improper mounting or mishandling.

•Use the monitor with the surface perpendicular to a level surface. If necessary, the monitor may be tilted up to 25 degrees upward or 20 degrees downward.

•This monitor should be used at an ambient temperature between 32°F (0°C) and 104°F (40°C). Provide enough space around the monitor to prevent heat from accumulating inside.

For the monitor in landscape orientation

		Unit: inch [cm]
	7-7/8 [20]	*
2		2
[5]		[5]
	2 [5]

For the monitor in portrait orientation

		Unit: inch [cm]
	7-7/8 [20]	*
2	2
[5]	[5]
	2 [5]

*When you install this monitor on a wall, the monitor emits heat during operation, please be aware that this heat may discolor or alter the wall.

•If it is difficult to provide sufficient space for any reason such as the installation of the monitor inside a housing, or if the ambient temperature may be outside of the range of 32°F (0°C) to 104°F (40°C), install a fan or take other measures to keep the ambient temperature within the required range.

•Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction.

•Do not place the monitor on a device which generates heat.

• When installing the
monitor in landscape	Horizontal sticker
orientation, you can attach
the supplied horizontal	(Operation
	buttons)
sticker (Operation buttons)
to the right side.

•Use the supplied vertical sticker when you install the monitor in portrait orientation.

Attach the vertical sticker (Operation buttons) to the back or the front.

• Back

Vertical sticker (Operation buttons)

• Front

Vertical sticker (Blank)

Vertical sticker (Operation buttons)

Cover

Sharp logo

Vertical sticker (Logo)

7 E