Sharp PN-K321 operation manual Basic Operation, Power button, 4,5. VOL+/ /VOL, MENU/ENTER button

Basic Operation

1

2

3

4

5

6

7

1.Power button ( )

Press this button to turn the power ON/OFF.

2,3. Brightness adjustment button ( / ) The brightness menu appears.

B R I G H T 15

Adjust the brightness with the brightness adjustment button ( / ).

*If you do not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears.

Move the cursor left or right in the menu screen, and increase or decrease the setting.

*The cursor moves right when the brightness adjustment button () is pressed, and left when the brightness adjustment button () is pressed.

4,5. [VOL+/ ]/[VOL-/	] button
The volume menu appears.
V O L U M E	15

Adjust the volume with the [VOL+/ ]/[VOL-/ ] buttons.

*If you do not press any buttons for about 4 seconds, the VOLUME menu automatically disappears.

Move the cursor up or down in the menu screen, and increase or decrease the setting.

*The cursor moves up when the [VOL+/ ] button is pressed, and down when the [VOL-/ ] button is pressed.

6. [MENU/ENTER] button

Displays and turns off the menu screen. (See page 18.) Settings can be entered when the menu screen is displayed.

7. [INPUT/RETURN] button

The input selection menu is displayed.

Press the [VOL+/ ]/[VOL-/ ] buttons to select the input mode, and press [INPUT/RETURN] button to enter.

Input mode	Video	Audio
DisplayPort	DisplayPort input terminal
HDMI1 [PC]	PC/AV HDMI input terminal*1
HDMI1 [AV]		*3
HDMI2 [PC]	PC/AV HDMI input terminal*2
HDMI2 [AV]

When HDMI DUAL is set to ON

Input mode	Video	Audio
DisplayPort	DisplayPort input terminal	*3

HDMI DUAL [PC]*4

PC/AV HDMI input terminal*4 *5

HDMI DUAL [AV]*4

*1 Select the terminal to be used in HDMI1 of INPUT SELECT. (See page 20.)

*2 Select the terminal to be used in HDMI2 of INPUT SELECT. (See page 20.)

*3 Select the terminal for AUDIO SELECT which is used for audio input. (See page 20.)

*4 Same as the HDMI1 terminal setting.

*5 Same as the AUDIO SELECT of HDMI1.

In a menu screen, returns the cursor to the previous screen.

TIPS

•If you are using the vertical sticker (Operation buttons), substitute the following for the button displays.

-Brightness adjustment button ( / )

→Brightness adjustment button ( / )

-[VOL+/ ]/[VOL-/ ] button

→[VOL+/ ]/[VOL-/ ] button

•If you are using the horizontal sticker (Operation buttons), substitute the following for the button displays.

-Brightness adjustment button ( / )

→Brightness adjustment button ( / )

-[VOL+/ ]/[VOL-/ ] button

→[ / VOL+]/[VOL-/ ] button

E16