Sharp PN-K321 29 E, Initialization/Functional Restriction Setting FUNCTION menu, Others

Controlling the Monitor with a PC (RS-232C)

Initialization/Functional Restriction Setting (FUNCTION) menu

Function	Command	Direction	Parameter	Reply		Control/Response contents
ALL RESET	RSET	W	0
ADJUSTMENT LOCK	ALCK	WR	0-2		0-2	0: OFF, 1:ON 1, 2:ON 2
OSD DISPLAY	LOSD	WR	0-2		0-2	0: ON 1, 1: OFF, 2: ON 2
LED	OFLD	WR	0-1		0-1	0: ON, 1: OFF
TEMPERATURE ALERT	TALT	WR	0-2		0-2	0: OFF, 1: OSD & LED, 2: LED
STATUS ALERT	SALT	WR	0-2		0-2	0: OFF, 1: OSD & LED, 2: LED

*

-

-

-

-

-

-

Others

Function	Command	Direction	Parameter	Reply	Control/Response contents	*
VOLUME	VOLM	WR	0-31	0-31		-
BRIGHT	VLMP	WR	0-31	0-31		-
TEMPERATURE SENSOR	DSTA	R		0	Internal temperature normal
				1	Internal temperature abnormal has occurred and the monitor is in
					standby mode
				2	Internal temperature abnormal occurred (To delete the information of	●
					temperature abnormal, turn off the main power.)
				3	Internal temperature abnormal has occurred and backlight brightness is
					dimmed
				4	Temperature sensor abnormal
TEMPERATURE ACQUISITION	ERRT	R		Value	Returns the temperature of the temperature sensor.	-
					Indicates a temperature sensor abnormality when “126” is returned.
CAUSE OF LAST STANDBY MODE	STCA	W	0		Initialization
		R		0	No detectable error has occurred
				1	Standby mode by POWER button
				2	Main power off by the main power switch	●
				3	Standby mode by RS-232C
				4	Input signal waiting mode by No Signal
				6	Standby mode by abnormal temperature
				20	Standby mode by OFF IF NO OPERATION setting

29 E