Manuals / Cisco Systems / Computer Equipment / Network Card

Cisco Systems Cisco 7505/7010 installation instructions Telco rack, H2919, H2918

Models: Cisco 7505/7010

1 14

Download 14 pages 39.63 Kb

Page 10

Image 10

Rack-Mounting the Chassis

Figure 5 Installing the Chassis in a Four-Post, 19-Inch Rack

H2919

Chassis front

Warning Install heavier equipment near the bottom of the rack to maintain a low center of gravity. A top-heavy rack could easily tip over if it is not anchored or bolted to the ﬂoor, resulting in injury.

Figure 6 Installing the Chassis in a Telco Rack

Telco rack

H2918

Chassis front

10Cisco 7010 and Cisco 7505 Rack-Mount and Cable Management Kits Installation Instructions

Page 10

Image 10

Cisco Systems Cisco 7505/7010 installation instructions Telco rack, H2919, H2918

Contents

Cisco 7010 Product Numbers ACC-7010RMK= and ACC-7010CBLM= Installation InstructionsCisco 7010 and Cisco Rack-Mount and Cable Management Kits Cisco 7505 Product Numbers ACS/5-RMK= and ACS/5-CBLM=Product Overview Product OverviewFigure 1 Noninterface Processor End of the Cisco 7010 Chassis Safety Guidelines PrerequisitesTools and Equipment Noninterface processor end Equipment Racks ConsiderationsInterface processor end General Precautions VentilationRack-Mounting the Chassis Rack-Mounting the ChassisInstalling the Ears on the Chassis Installing the Chassis in the Rack H2919 Telco rackH2918 To install the chassis in the rack, follow these steps Installing the Cable Management Brackets Installing the Cable Management BracketsFigure 7 Cable Management Brackets-Cisco 7010 Chassis Shown Cisco Information Online Cisco Information Online