Text Part Number: 78-2473-02
Cisco 7513 and Cisco 7576
Cable-Management Bracket Installation
Instructions
Product Numbers: ACS-7513CBLM= (Cisco 7513), ACS-7576CBLM= (Cisco 7576)
Customer Order Number: DOC-782473=
The cable-management bracket for the Cisco 7513 and Cisco 7576 chassis is a spare part that can be installed in the field. This publication describes the procedure required to install the cable-management bracket.
Document Contents
This publication contains the following sections:
Product Overview, page 1
Installing the Cable-Management Bracket, page 2
Cisco Connection Online, page 5
Product Overview
The Cisco 7513 and Cisco 7576 cable-management bracket is mounted above the card cage, on the interface processor end of the chassis. (See Figure 1.) The bracket allows you to route cables away from the interface processors, which keeps this area clear for any future maintenance requirements.
Note The Cisco 7513 and Cisco 7576 use the same chassis and cable-management bracket. However, the backplane and the interface processor slot numbering scheme on the card cages are different. The interface processor slot numbering scheme of the Cisco 7513 is shown in Figure 1. The slot numbering scheme has no effect on the location or installation of the cable-management bracket.
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Copyright © 1996-1998 | |
Cisco Systems, Inc. | 1 |
All rights reserved. |