Cisco Systems Cisco 7513/7576 Tools and Equipment Required, Installation Procedure

Tools and Equipment Required

Tools and Equipment Required

You need the following tools and parts to install the cable-management brackets; the brackets and panhead screws are included with the chassis:

•

•

Large flat-blade screwdriver

One cable-management bracket and two slotted panhead screws (already attached to the chassis)

Installation Procedure

To install the cable-management bracket, follow these steps:

Step 1 On the interface processor end of the chassis, locate the two slotted screws positioned below the blower module and above the card cage. (See Figure 2.)

Figure 2 Cable-Management Bracket

Cisco 7513 and Cisco 7576 Cable-Management Bracket Installation Instructions 3