Cisco TelePresence MX Series
Administrator guide
Table of contents
Introduction
Web interface
Advanced settings
Appendices |
| 61 |
| ||
|
Video AllowWebSnapshots
Allow or disallow that snapshots captured by the video input main source can be displayed in the web interface Call Control page.
NOTE: This feature is disabled by default, and must be enabled from the Touch controller.
Requires user role: ADMIN
Value space: <On/Off>
On: If set to on, a web snapshot can be generated and displayed on the web interface.
Off: The generation of web snapshots is not allowed.
Example: Video AllowWebSnapshots: Off
Video Output LCD [1] Resolution
Set the screen resolution.
Requires user role: ADMIN
Value space: <1920_1080_60>
Range: The screen resolution is 1920 x 1080 60 Hz.
Example: Video Output LCD 1 Resolution: 1920_1080_60
Video Output LCD [1] MonitorRole
Set the LCD monitor role.
It is highly recommended to use the default setting. NOTE: The settings made here will be overruled by the touch controller.
Requires user role: ADMIN
Value space: <First/Second/PresentationOnly/InternalSetup> First: Show main video stream.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
InternalSetup: Internal setup from the touch controller will be used.
Example: Video Output LCD 1 MonitorRole: InternalSetup
Video Output LCD [1] Brightness
Set the brightness level for the monitor.
Requires user role: ADMIN
Value space: <S: 0, 100>
Range: Select a value from 0 to 100.
Example: Video Output LCD 1 Brightness: 50
Video Output LCD [1] Red
Set the Red color level for the monitor.
Requires user role: ADMIN
Value space: <S: 0, 100>
Range: Select a value from 0 to 100.
Example: Video Output LCD 1 Red: 50
Video Output LCD [1] Green
Set the Green color level for the monitor.
Requires user role: ADMIN
Value space: <S: 0, 100>
Range: Select a value from 0 to 100.
Example: Video Output LCD 1 Green: 50
Video Output LCD [1] Blue
Set the Blue color level for the monitor.
Requires user role: ADMIN
Value space: <S: 0, 100>
Range: Select a value from 0 to 100.
Example: Video Output LCD 1 Blue: 50
Video Output Internal [2] MonitorRole
Determine the role of the internal monitor and select where to show the video stream and presentation.
It is highly recommended to use the default setting.
Requires user role: ADMIN
Value space: <First/Second/PresentationOnly>
First: Show the main video stream.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
Example: Video Output Internal 2: First
Video Selfview
Determine if the main video source (selfview) shall be displayed on screen.
Requires user role: USER
Value space: <On/Off>
On: Display selfview on screen.
Off: Do not display selfview on screen.
Example: Video Selfview: On
D14850.02 MX Series Administrator Guide (TC5.0) 2011 NOVEMBER © 2011 Cisco Systems, Inc. All rights reserved. | www.cisco.com |
