D14850.02 MX Series Administrator Guide (TC5.0) | 2011 NOVEMBER | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com
62
Cisco TelePresence MX Series
AdministrAtor guide

VideoWallPaper

Determine which background picture to show on the touch screen and main screen when idle. It
is recommended to use Wallpaper01 to Wallpaper12.
Requiresuserrole: USER
Valuespace: <None/Growing/Summersky/Custom/Wallpaper01/Wallpaper02/
Wallpaper03/Wallpaper04/Wallpaper05/Wallpaper06/Wallpaper07/Wallpaper08/
Wallpaper09/Wallpaper10/Wallpaper11/Wallpaper12>
Wallpaper01 to Wallpaper12: Select one of the predefined wallpapers to be displayed on the
main screen and touch screen. The wallpaper will be shown on both screens.
None: No wallpaper will be displayed on the main screen. NOTE: When you change the
wallpaper on the touch screen, it will also set the wallpaper for the main screen.
Summersky, Growing: Select one of the predefined wallpapers to be displayed on the main
screen. It will not be displayed on the touch screen. NOTE: When you change the wallpaper
on the touch screen, it will also change the wallpaper for the main screen.
Custom: The custom wallpaper will only show on the main screen, not the touch screen.
It must be uploaded to the codec from the web interface before selecting Custom. The
maximum supported resolution is 1920x1280.
1) On the video system: Find the IP address of the codec. Open the menu on screen and go
to Home > Settings > System information to find the IP Address.
2) On your computer: Open a web browser and enter the IP address of the codec. Select
"Wallpaper" from the menu, browse for the file, and press the "Upload" button.
3) On the web interface: Log in and go to Advanced Configuration > Video > Wallpaper and
select Custom. Give it a few seconds to display the new picture. If the picture does not show,
toggle once between "None" and "Custom" wallpaper to make the change take effect.
NOTE: When you change the wallpaper on the touch screen, it will also change the wallpaper
for the main screen.
Example: Video Wallpaper: Wallpaper01

TheExperimentalsettings

The Experimental settings are beta preview features and can be used 'as is'. They are not fully
documented.
NOTE: The Experimental settings are likely to change without further notice.

ExperimentalCapsetFilter

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requiresuserrole: ADMIN
Valuespace: <S: 0, 100>
Example: Experimental CapsetFilter: ""

ExperimentalCapsetReduction

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requiresuserrole: ADMIN
Valuespace: <Auto/Reduced>
Example: Experimental CapsetReduction: Auto

ExperimentalConference[1..1]PacketLossResilienceForwardErrorCorrection

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Will enable ForwardErrorCorrection (RFC5109) mechanism as part of the PacketLossResilience
mechanism. Default value is On.
On: Forward error correction will be used as part of the PacketLossResilience mechanism.
Off: Forward error correction will NOT be used as part of the PacketLossResilience mechanism.
Requiresuserrole: ADMIN
Valuespace: <On/Off>
Example: Experimental Conference 1 PacketLossResilience
ForwardErrorCorrection: On
Introduction
Table of contents
Web interface
Advanced settings
Appendices
Advanced settings