Installing the CFP Transceiver
Step 5 Press firmly on the front of the CFP transceiver with your thumb to fully seat it in the transceiver socket. (See Figure 5.)
Figure 5 | Seating the CFP Transceiver Module in the Socket |
281586
Step 6 Gently tighten the two captive installation screws on the transceiver to secure the CFP transceiver in the socket. (See Figure 6.)
Figure 6 | Securing the CFP Transceiver Module |
281587
Step 7 Reinstall the dust plug into the CFP transceiver’s optical bore until you are ready to attach the network interface cable.
Cisco
14 |
| |
|