Removing the CFP Transceiver
| If you need to remove a CFP transceiver, follow these steps: | |
|
| |
Step 1 | Disconnect the network | |
| dust plugs in the CFP transceiver optical bores. | |
Step 2 | Loosen the two captive installation screws that secure the CFP to the networking module. | |
Step 3 | Slide the CFP transceiver out of the module socket. (See Figure 9.) Immediately place the CFP | |
| transceiver in antistatic protective packaging. | |
| Figure 9 | Removing a CFP Transceiver Module |
Captive installation screws
Optical bore dust plugs
INK
L
281589
Cisco
| 17 |
| |
|
|