Cisco Systems CFP-40G-LR4, CVR-CFP-4SFP10G, CFP-40G-SR4, CFP-100G-LR4 manual SC connector, cable

Installing the CFP Transceiver

Step 8 When you are ready to attach the network cable interface, remove the dust plugs and inspect and clean fiber connector end faces, and then immediately attach the network interface cable connectors into the CFP transceiver optical bores. (See Figure 7and Figure 8.)

Note If you are installing a FourX adapter (CVR-CFP-4SFP10G=) (shown in Figure 3), you must install 10GBASE-X SFP+ transceivers in the adapter ports. Follow the SFP+ transceiver installation procedure documented at:

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/installation/note/7 8_15160.html

For complete information on inspecting and cleaning fiber-optic connections, see the white-paper document at this URL:

http://www.cisco.com/en/US/tech/tk482/tk876/technologies_white_paper09186a0080254eba.shtml

Figure 7 Cabling an Optical CFP Transceiver Module with SC Connectors

1

SC connector

LI
NK
2
Network interface
cable
A
C
TI
	VE

281588

Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Installation Note

OL-23946-01 15