Product Description
Figure 9 shows the rear of the Cisco 7513, with two AC-input power supplies installed. Two slots (6 and 7) are reserved for the second generation Route Switch Processor (RSP2), which contains the system processor and performs packet switching functions. Slots 0 through 5, and 8 through 12 are for interface processors.
Figure 9 Cisco 7513, Interface Processor End
Blower module 
bracket
Card cage and 
processor modules
Air intake vent 
AC | FAN OUTPUT | |
OK | OK | FAIL |
Power supplies | POWER |
Chassis grounding | A |
I | |
receptacle (2) | 0 |
NORMAL |
|
EJECT | |
SLOT | 1 |
SLOT0 | |
SLAVEMASTER | |
SLAVE/MASTER | |
CPU | HALT |
| |
RESET | |
AUX. |
|
CONSOLE | ROUTE | |
SWITCHPROCESSOR2 | ||
|
AC | FAN OUTPUT | |
OK | OK | FAIL |
I
0
ENABLE
ENABLE
POWER
B
H3087
10Token Ring Interface Processor (TRIP) Installation and Configuration
