33
Chapter 3: Advanced Configuration
User Guide
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to
check the connections of your network devices, including
connection to the Internet.
Administration > Diagnostics

Diagnostics

Ping Test

The Ping test checks the status of a connection.
IP or URL Address Enter the address of the computer,
device, or website whose connection you wish to test.
Packet Size Enter the packet size you want to use. The
default is 32 bytes.
Times to Ping Enter many times you wish to test it.
Start to Ping To run the test, click this button. The Ping
Test screen will show if the test was successful. Click Close
to return to the Diagnostics screen.
Diagnostics > Ping

Traceroute Test

The Traceroute test tests the performance of a connection.
IP or URL Address Enter the address of the computer,
device, or website whose connection you wish to test.
Start to Traceroute To run the test, click this button. The
Traceroute Test screen will show if the test was successful.
Click Close to return to the Diagnostics screen.
Diagnostics > Traceroute
Administration > Factory Defaults
The Administration > Factory Defaults screen allows you
to restore the Valet’s configuration to its factory default
settings.
Administration > Factory Defaults
NOTE: Do not restore the factory defaults
unless you are having difficulties with the Valet
and have exhausted all other troubleshooting
measures. Once the Valet is reset, you will have
to re-enter all of your configuration settings.

Factory Defaults

Restore All S ettings To reset the Valet’s settings to
the default values, click this button and then follow the
on-screen instructions. Any settings you have saved will
be lost when the default settings are restored.