Chapter 3 Initial Configuration
Default Gateway Configuration
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m
Default Gateway Configuration
The switch sends IP packets with unresolved destination IP addresses to the default gateway. Figure
Figure | Default Gateway |
Default
gateway
Console
connection
Switch 2
mgmt 0
(IP address: 172.16.1.2)
| Router |
IP Address | IP |
172.16.1.1 | Network |
Telnet or | CLI |
SSH |
|
| DNS server |
| GUI |
SNMP
Management LAN
(Ethernet connection)
79937
Configuring the Default Gateway
| To configure the IP address of the default gateway, follow these steps: | |
|
|
|
| Command | Purpose |
Step 1 |
|
|
switch# config t | Enters configuration mode. | |
Step 2 |
|
|
switch(config)# ip | Configures the 172.16.1.1 IP address. | |
|
|
|
Cisco MDS 9020 Fabric Switch Configuration Guide and Command Reference
|
| ||
|
|
