Attaching the Brackets | Cisco Systems ME 3400E manual

Attaching the Brackets

Use four Phillips flat-head screws to attach the long side of the brackets to the switches in one of mounting positions (for all but the Cisco ME 3400EG-2CS-A switch):

1

2

3

PSU OK	+24V -48V
	+24V -48V
	DC
	PSU OK	+24V -48V
		+24V -48V
		DC

4

1	Front-mounting position	3	Mid-rack mounting position (telco rack)

2	Number-8 Phillips flat-head screws	4	Rear-mounting position

281102

Use the tab on the bracket and the Phillips flat-head screw to attach the short side of each bracket to the Cisco ME 3400EG-2CS-A switch in this mounting position:

280836

10

Image 10

Cisco Systems ME 3400E warranty Attaching the Brackets

Contents

Cisco ME 3400E Ethernet Access Switch Getting Started Guide About this Guide Equipment That You Supply to Set Up Your SwitchTaking Out What You Need Shipping Box Contents Safety Warnings Metal object to the terminals. Statement Initial Setup Power on the switch Completing the Initial Configuration Managing the Switch through the CLI Other Management Options Equipment That You Supply Rack-Mounting the SwitchBefore You Begin Attaching the Brackets Rack-Mount the Switch Install the SFP Modules and Connect to the Ports Connecting to the Switch PortsConnect to 10/100 or 10/100/1000 Ports Case of Difficulty Troubleshooting Initial Configuration SetupResetting the Switch Verify Port Connectivity Accessing Troubleshooting Information on Cisco.com For More Information Obtaining Documentation and Submitting a Service Request Cisco 90-Day Limited Hardware Warranty Terms OL-16448-01