Cisco Systems ME 3400E 1 , 2

1 About this Guide

This guide provides instructions on how to install and configure your Cisco Metro Ethernet (ME) 3400E Ethernet Access switch.

Also covered are switch management options, basic rack-mounting procedures, port and module connections, power connection

procedures, and troubleshooting help.

For additional installation and configuration information, see the Cisco ME 3400E switch documentation on Cisco.com. For

system requirements, important notes, limitations, open and resolved bugs, and last-minute documentation updates, see the

release notes, also on Cisco.com.

When you use the online publications, refer to the documents that match the Cisco IOS software version that is running on the

switch. Look on the switch rear panel to locate the software version or enter the show version command from the command-line

interface (CLI).

Before you set up your switch, and to see translations of safety warnings, review the warnings in the Regulatory Compliance

and Safety Information for the Cisco ME 3400E Ethernet Access Switch on the documentation CD or Cisco.com.

2 Taking Out What You Need

1. Unpack and remove the switch and the accessory kit from the shipping box.

2. Return the packing material to the shipping container, and save it for future use.

3. Verify that you have received the items shown in the “Shipping Box Contents” section on page 3. If any item is missing or

damaged, contact your Cisco representative or reseller for instructions. Some switch models might include additional items,

and you might need to supply or to order some optional items.

You need:

•PC

•RJ-45-to-DB-9 adapter cable (if you did not order one with your switch)

•Ethernet (Category 5) straight-through cable (as shown)