2-21
Installation Guide for the Cisco MGC Node Manager 2.5(2)
OL-4062-02
Chapter2 Installing Cisco MGC Node Manager Uninstalling Cisco EMF
Uninstalling Cisco EMF
You must uninstall Cisco MGC Node Manager before uninstalling Cisco EMF. When Cisco EMF is
deinstalled, all Cisco EMF processes are automatically stopped. If ObjectStore was installed as part of
the Cisco EMF installation, it is removed during uninstallation. If Objec tStore was installe d as a separate
package before the Cisco EMF installation, ObjectStore still remains installed after Cisco EMF is
deinstalled.
Use the following procedure to uninstall CiscoEMF:
Step 1 As a superuser (su), log in to the machine where Cisco EMF is installed.
Step 2 Ensure that Cisco MGC Node Manager has been de insta lled.
Step 3 At the command line prompt, enter the following command to change to the Cisco EM F bin direct ory:
cd /opt/<CEMF_ROOT>/bin
Step 4 At the command line prompt, enter:
./cemfinstall -remove
Step 5 Choose an option from the menu.
For more details, see the Cisco Element Management Framework Installation and Configuration Guide
at
http://www.cisco.com/en/US/products/sw/netmgtsw/ps829/products_installation_and_configuration_g
uides_list.html.
Troubleshooting Common Installation Problems
Carefully following the “Installation Checklist” section on page1-5, will avoid most installation pitfalls.
If a problem does occur, check this section for tro uble shoo tin g g ui del ines.
Related Topics
Cisco MGC Node Manager User’s Guide, Appendix C, “Troubleshooting CiscoMGC Node Manager”.
“Problems Installing an Element Manager on Cisco EMF” in the Cisco Element Management
Framework Installation and Configuration Guide.