Cisco Systems Cisco MGX 8950 Release 2.1 Documentation, SES PNNI Release 1.1 Documentation

About this Guide

Related Documentation

Cisco MGX 8950 Release 2.1 Documentation

The product documentation for the installation and operation of the MGX 8950 Release 2.1 switch is listed in Table 4.

Table 4	Cisco MGX 8950 Switch Release 2.1 Documentation
Title		Description
Cisco MGX 8950 Switch Hardware Installation Guide,		Describes how to install the MGX 8950 core switch. It explains
Release 2.1		what the switch does, and covers site preparation, grounding,
DOC-7812564=		safety, card installation, and cabling.
Cisco MGX 8850 and MGX 8950 Switch Command		Describes how to use the commands that are available in the CLI
Reference, Release 2.1		of the MGX 8850 and MGX 8950 switches.
DOC-7812563=
Cisco MGX 8850 and MGX 8950 SNMP Reference,		Provides information on all supported MIB objects, support
Release 2.1		restrictions, traps, and alarms for the AXSM, PXM45, and RPM.
DOC-7812562=		PNNI is also supported.
Cisco MGX and SES PNNI Network Planning Guide		Provides guidelines for planning a PNNI network that uses the
DOC-7813543=		MGX 8850 and the MGX 8950 switches and the BPX 8600
		switches. When connected to a PNNI network, each BPX 8600
		series switch requires a SES1 for PNNI route processing.
Cisco MGX Route Processor Module Installation and		Describes how to install and configure the MGX Route Processor
Configuration Guide, Release 2.1		Module (RPM-PR) in the MGX 8850 and MGX 8950 Release 2.1
DOC-7812510=		switch. Also provides site preparation, troubleshooting,
		maintenance, cable and connector specifications, and basic IOS
		configuration information.
1. SES = Service Expansion Shelf

SES PNNI Release 1.1 Documentation

The product documentation that contains information for the understanding, the installation, and the operation of the Service Expansion Shelf (SES) PNNI Controller is listed in Table 5.

Table 5		SES PNNI Controller Release 1.1 Documentation
	Title		Description
	Cisco SES PNNI Controller Software Configuration Guide,		Describes how to configure, operate, and maintain the SES
	Release 1.1		PNNI Controller.
	DOC-7813539=
	Cisco SES PNNI Controller Software Command Reference,		Provides a description of the commands used to configure and
	Release 1.1		operate the SES PNNI Controller.
	DOC-7813541=
	Cisco MGX and SES PNNI Network Planning Guide		Provides guidelines for planning a PNNI network that uses the
	DOC-7813543=		MGX 8850 and the MGX 8950 switches and the BPX 8600
			switches. When connected to a PNNI network, each BPX 8600
			series switch requires a SES for PNNI route processing.
		Cisco MGX 8950 Hardware Installation Guide
	xviii		Release 2.1, Part Number 78-11273-01 Rev. B0, March 2002