Cisco Systems NM-16AM-V2, NM-8AM-V2 manual Modem country smartacf, Release Modification

Cisco NM-8AM-V2 and NM-16AM-V2 Analog Modem Network Modules with V.92

modem country smart_acf

modem country smart_acf

To customize the modem firmware behavior according to the country of deployment, use the modem country smart_acf command in global configuration mode. To set the default value, use the no form of this command.

modem country smart_acf country-name

no modem country smart_acf country-name

Syntax Description

Defaults

Command Modes

Command History

country-name	Name of the country. For valid argument values, see the table in the “Usage
	Guidelines” section.

United States and Canada

Global configuration

Release	Modification
12.3(4)XD	This command was introduced.
12.3(7)T	This command was integrated in Cisco IOS Release 12.3(7)T on Cisco 2600
	series and Cisco 3700 series routers.

Usage Guidelines Use this command to set the modem for use in a specific country. When a country name is specified, the firmware customizes the modem for use in the country where it is deployed. The following table includes valid values for the country-nameargument and the country or countries associated with each argument value.

Valid Values for the country-nameArgument	Country or Countries Where Located
argentina	Argentina
australia	Australia
austria	Austria
belgium	Belgium and Luxemburg
brazil	Brazil
bulgaria	Bulgaria
china	China
croatia	Croatia
czech	Czechoslovakia
denmark	Denmark and Iceland
finland	Finland
france	France

Cisco IOS Release 12.3(7)T

10