Cisco Systems NSS2000 Series manual Configuring the Network Storage System NSS, Click Update

Configuring the Network Storage System (NSS)	3
Step 4 — Save the Current Configuration

The Configuration Manager page appears.

STEP 3 Select the location where the backup is saved from the Stored Configuration Location drop-down menu. To save the configuration file to a USB flash device, select the AUX-1port as the location. You can then copy the configuration file from the USB flash device to another location on your network.

STEP 4 Click Update.

STEP 5 Click Save to save the configuration settings. If the configuration file does not successfully save to the specified volume, check the volume to ensure that it is not locked.

STEP 6 If you saved the file to the USB flash device, display the Storage Status page.

NSS2000 Getting Started Guide 15