LEDs & Buttons
Reset Button (Front Panel)
A
Reset Button (Front Panel)
The Reset button lets you restore the network setting system defaults or reset the box.
•To restore the network setting system defaults: You need to do this if the configuration interface becomes inaccessible. To reset the network setting system defaults, shut down the NSS, hold down the Reset button, and then power up the NSS. When you see the Power LED blink yellow rapidly, release the Reset button. The network settings are restored to factory defaults.
•To reset the box: Press and hold the Reset button while the system is running until the Power LED begins to blink green. Release the Reset button.
LAN LED (Front Panel)
The LEDs on the front panel indicate the status of the LAN link:
•Solid Green: The LAN link is up and running at 1000 link speed, but is currently idle.
•Flickering Green: The LAN link is up and running at 1000 link speed and is currently active. The LED flickers off with activity.
•Solid Yellow: The LAN link is up and running at 10/100 link speed, but is currently idle.
•Flickering Yellow: The LAN link is up and running at 10/100 link speed and is currently active. The LED flickers off with activity.
•Off: No LAN link is detected.
NSS2000 Getting Started Guide | 25 |
