Cisco Systems OL-14625-01 manual Vlan

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely

Network Configuration

Table 8-2		Network Configuration Area Items (continued)
	Item			Description
	SW Port Configuration			Speed and duplex of the switch port, where:
				•	A—Auto Negotiate
				•	10H—10-BaseT/half duplex
				•	10F—10-BaseT/full duplex
				•	100H—100-BaseT/half duplex
				•	100F—100-BaseT/full duplex
				• No Link—No connection to the switch port
	PC Port Configuration			Speed and duplex of the switch port, where:
				•	A—Auto Negotiate
				•	10H—10-BaseT/half duplex
				•	10F—10-BaseT/full duplex
				•	100H—100-BaseT/half duplex
				•	100F—100-BaseT/full duplex
				• No Link—No connection to the PC port
	TFTP Server 2			Backup TFTP server that the phone uses if the primary TFTP server is unavailable.
	User Locale			User locale associated with the phone user. Identifies a set of detailed information to
				support users, including language, font, date and time formatting, and alphanumeric
				keyboard text information.
	Network Locale			Network locale associated with the phone user. Identifies a set of detailed information to
				support the phone in a specific location, including definitions of the tones and cadences
				used by the phone.
	Headset Enabled			Indicates whether the Headset button is enabled on the phone.
	User Locale Version			Version of the user locale loaded on the phone.
	Network Locale Version			Version of the network locale loaded on the phone.
	PC Port Disabled			Indicates whether the PC port on the phone is enabled or disabled.
	Speaker Enabled			Indicates whether the speakerphone is enabled on the phone.
	GARP Enabled			Indicates whether the phone learns MAC addresses from Gratuitous ARP responses.
	Video Capability Enabled			Indicates whether the phone can participate in video calls when connected to an
				appropriately equipped PC.
	Voice VLAN Enabled			Indicates whether the phone allows a device attached to the PC port to access the Voice
				VLAN.
	Auto Line Select			Indicates whether the phone shifts the call focus to incoming calls on all lines.
	DSCP for Call Control			DSCP IP classification for call control signaling.
	DSCP for Configuration			DSCP IP classification for any phone configuration transfer.
	DSCP for Services			DSCP IP classification for phone-based services.
	Security Mode			Displays the security mode that is set for the phone.
	Web Access Enabled			Indicates whether web access is enabled (Yes) or disabled (No) for the phone.
			Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1
	OL-14625-01					8-7