Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
Table | Network Configuration Area Items (continued) | ||
|
|
| |
Item |
| Description | |
|
|
| |
Span to PC Port |
| Indicates whether the phone will forward packets transmitted and received on the network | |
|
| port to the access port. | |
|
|
| |
PC VLAN |
| VLAN used to identify and remove 802.1P/Q tags from packets sent to the PC. | |
|
| ||
Forwarding Delay | Indicates whether the internal switch begins forwarding packets between the PC port and | ||
|
| switched port on the phone when the phone becomes active. | |
|
|
| |
LLDP: PC Port |
| Indicates whether Link Layer Discovery Protocol (LLDP) is enabled on the PC port. | |
|
| ||
Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery | |||
|
| ||
|
| ||
LLDP Power Priority | Advertises the phone’s power priority to the switch, enabling the switch to appropriately | ||
|
| provide power to the phones. Settings include: | |
|
| • | |
|
| • | Low |
|
| • | High |
|
| • | Critical |
|
|
| |
LLDP Asset ID |
| Identifies the asset ID assigned to the phone for inventory management. | |
|
|
| |
CDP: PC Port |
| Indicates whether CDP is supported on the PC port (default is enabled). | |
|
| Enable CDP on the PC port when Cisco VT Advantage/Unified Video Advantage (CVTA) | |
|
| is connected to the PC port. CVTA does not work without CDP interaction with the phone. | |
|
| Note When CDP is disabled in Cisco Unified Communications Manager, a warning is | |
|
|
| displayed, indicating that disabling CDP on the PC port prevents CVTA from |
|
|
| working. |
|
| Note The current PC and switch port CDP values are shown on the Settings menu. | |
|
|
| |
CDP: SW Port |
| Indicates whether CDP is supported on the switch port (default is enabled). | |
|
| • Enable CDP on the switch port for VLAN assignment for the phone, power | |
|
|
| negotiation, QoS management, and 802.1x security. |
|
| • Enable CDP on the switch port when the phone is connected to a Cisco switch. | |
|
| Note When CDP is disabled in Cisco Unified Communications Manager, a warning is | |
|
|
| presented, indicating that CDP should be disabled on the switch port only if the |
|
|
| phone is connected to a |
|
| Note The current PC and switch port CDP values are shown on the Settings menu. | |
|
| ||
LLDP Power Priority | Advertises the phone’s power priority to the switch, enabling the switch to appropriately | ||
|
| provide power to the phones. Settings include: | |
|
| • | |
|
| • | Low |
|
| • | High |
|
| • | Critical |
|
|
| |
LLDP Asset ID |
| Identifies the asset ID assigned to the phone for inventory management. | |
|
|
|
|
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1
| ||
|