Cisco Systems OL-18611-01 manual Field Description, 103-2

Chapter 103 Common Phone Profile Configuration

Common Phone Profile Configuration Settings

Table 103-1 Common Phone Profile Configuration Settings

Field

Description

Common Phone Profile Information

Name	Enter a name to identify the common phone profile; for example,
	CPP_7905. The value can include 1 to 50 characters, including
	alphanumeric characters, dot, dash, and underscores.
Description	Identify the purpose of the common phone profile; for example, common
	phone profile for the 7905 phone.
Local Phone Unlock	Enter the password that is used to unlock a local phone. Valid values
Password	comprise 1 to 15 characters.
DND Option	When you enable Do Not Disturb (DND) on the phone, this parameter
	allows you to specify how the DND features handle incoming calls:
	• Call Reject—This option specifies that no incoming call
	information gets presented to the user. Depending on how you
	configure the DND Incoming Call Alert parameter, the phone may
	play a beep or display a flash notification of the call.
	• Ringer Off—This option turns off the ringer, but incoming call
	information gets presented to the device, so the user can accept the
	call.
	Note For 7940/7960 phones that are running SCCP, you can only
	choose the Ringer Off option. For mobile devices and dual-mode
	phones, you can only choose the Call Reject option. When you
	activate DND Call Reject on a mobile device or dual-mode
	phone, no call information gets presented to the device.
DND Incoming Call Alert	When you enable the DND Ringer Off or Call Reject option, this
	parameter specifies how a call displays on a phone.
	From the drop-down list, choose one of the following options:
	• Disable—This option disables both beep and flash notification of a
	call, but for the DND Ringer Off option, incoming call information
	still gets displayed. For the DND Call Reject option, no call alerts
	display, and no information gets sent to the device.
	• Beep Only—For an incoming call, this option causes the phone to
	beep.
	• Flash Only—For an incoming call, this option causes the phone to
	display a flash alert.
Enable End User Access to	Check this check box to enable end users to change the background
Phone Background Image	image on phones that use this common phone profile.
Setting

	Cisco Unified Communications Manager Administration Guide
103-2	OL-18611-01