![](/images/new-backgrounds/1318196/31819627x1.webp)
Installation and Startup
Connecting the Power Supply
You can mount the power supply with any orientation or on top of a table or
1.Verify that the power switch located on the back of the camera is turned off.
2.Plug the 5.5mm female connector of the power supply into the DC POWER jack on the back of the camera.
3.Connect the other end of the power supply into a 120 VAC source.
!Do not modify the length of the AC or the DC wiring.
PVI COM | COM POSITE | DC | ||
|
| OUT | VIDEO OUT | POWER |
AUX A |
|
|
| |
|
|
|
| POWER |