5-3
Cisco IP/TV Viewer User Guide
OL-3995-01
Chapter5 Customizing the User Interface
About Toolbars

Moving Panes

You can move the Program Categories pane or adjust the width of the
Program Listings pane by dragging the middle gripper bar to the left or rig ht.
When moving the Program Categories pane, turn on the Allow Docking command
when you want to dock this pane and turn off the Allow Docking command when
you want to float this pane.
To access the Allow Docking command, place your cursor in the Program
Categories or Program Listings pane gripper bar and right-click. A popup me nu
appears with the commands Allow Docking and Hide.
Note Another way to prevent docking when the Allow Docking command is checked
is to hold down the Ctrl key while dragging panes or toolbars.

Displaying or Hiding Panes

To display IP/TV Content Managers in IP/TV Viewer main window, choose
View> Content Managers. To hide this pane, uncheck this selectio n, or choose
the Hide command in the popup menu.
About Toolbars
Toolbars allow you to access and organize IP/TV Viewer commands quickly and
easily. You can customize built-in toolbars or create new toolbars. You can add
and remove buttons, hide or display toolbars, and move toolbars. Toolbars can be
docked or floating.
A docked toolbar is attached to one edge of IP/TV main window or viewer
window. You can dock a toolbar below the title bar of the window or to the left,
right, or bottom edge of the main window. When you drag a toolbar to the e dge of
the window, the toolbar snaps into place along the length of the edge of the
window.
You can change the location of toolbars as desired. For example, in Figure 5-3 the
toolbars are docked, but not in their default positions.