EMC Class a Statements/Warnings

EMC Environmental Conditions for Products Installed in the European Union

The following operating conditions are required within the European Community.

•The ports marked “Ethernet,” “Console,” and “AUX” are SELV circuits.

•SELV circuits should only be connected to other SELV circuits.

This section includes the EMC Class A statements and warnings for the Cisco MWR 1941-DC-A router.

EMC Environmental Conditions

This equipment is intended to operate under the following environmental conditions with respect to EMC:

1.A separate defined location under the user’s control.

2.Earthing and bonding shall meet the requirements of ETS 300 253 or CCITT K27. Acceptable environmental parameters are listed in Table 2.

Table 2	Environmental Parameters

Parameter		Range

Operating Temperature		14 to 131˚F (-10 to + 55˚C)

Non-Operational Temperature		-40 to 185˚F (-40 to + 85˚C)

Operating Humidity		5 to 90% RH (non-condensing)

Operating Altitude		9,842.5 ft (3000 m) @ 104˚F (40˚C)

Operating Vibration		0.41 Grms, 3 to 500 Hz/2 hours per axis GR-63-CORE earthquake
		resistance, Zone 4, shelf-level

Non-Operational Vibration		1.12 Grms, 3 to 500 Hz/30 minutes per axis

Operating Acoustics		<60 dBa

In addition, if equipment is operated in a domestic environment, interference may occur.

Cisco Regulatory Compliance and Safety Information for the Cisco MWR 1941-DC-A Mobile Wireless Edge Router

	OL-7870-02	57