Cisco Systems OL-8122-01 Supported Hardware, When You Are Done

1-13
User Guide for the CatalystExpress 500 Switches
OL-8122-01
Chapter1 Introduction
Supported Hardware
Simple Network Management Protocol
You can use Simple Network Management Protocol (SNMP) management
applications to manage the switch. You also can manage it from an
SNMP-compatible workstation.
Supported Hardware
The switches support the PWR675-AC-RPS RPS. (Available only on the Catalyst
Express 500-24PC model.)
The switches support these Cisco SFP modules:
•100BASE-BX
•100BASE-FX
•100BASE-LX
•1000BASE-LX
•1000BASE-SX
When You Are Done
If you have not already installed the switch and configured its basic settings, see
Chapter 2, “Setup and Installation.”
If you already installed and configured the switch with its basic settings, see
Chapter 3, “Customization,” to learn about features that can optimize the switch
performance.