Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network

Adding Phones to the Cisco Unified CallManager Database

After you have collected MAC addresses, in Cisco Unified CallManager

Administration, choose Device > Phone and click Add New to begin.

For complete instructions and conceptual information about Cisco Unified CallManager, refer to Cisco Unified CallManager Administration Guide and to Cisco Unified CallManager System Guide.

Related Topics

Adding Phones with Auto-Registration, page 2-12

Adding Phones with Auto-Registration and TAPS, page 2-13

Adding Phones with BAT, page 2-15

Adding Phones with BAT

The Cisco Bulk Administration Tool (BAT) is a plug-in application for Cisco Unified CallManager that enables you to perform batch operations, including registration, on multiple phones.

Before you can add phones using BAT only (not in conjunction with TAPS), you must obtain the MAC address for each phone.

For information about determining a MAC address, see the “Determining the

MAC Address of a Cisco Unified IP Phone” section on page 2-18.

For detailed instructions about using BAT, refer to Cisco Unified CallManager Administration Guide and to Cisco Unified CallManager Bulk Administration Guide.

Related Topics

Adding Phones with Auto-Registration, page 2-12

Adding Phones with Auto-Registration and TAPS, page 2-13

Adding Phones with Cisco Unified CallManager Administration, page 2-14

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones

 

OL-8148-01

2-15

 

Page 15
Image 15
Cisco Systems OL-8148-01 manual Adding Phones with BAT