Cisco Systems OL-8148-01 manual Converting an In-Use Phone from Sccp to SIP

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network

Using Cisco Unified IP Phones with Different Protocols

See the “Configuring Startup Network Settings” section on page 3-14.

Step 3 Power cycle the phone.

Converting an In-Use Phone from SCCP to SIP

You can use the Bulk Administration Tool (BAT) to convert a phone that is in use in your network from SCCP to SIP. To access BAT from Cisco Unified CallManager Administration, choose Bulk Administration > Phones > Migrate Phones > SCCP to SIP. For detailed information, refer to Cisco Unified CallManager Bulk Administration Guide.

Converting an In-Use Phone from SIP to SCCP

To convert a phone that is in use in your network from SIP to SCCP, perform these steps. For more information, Cisco Unified CallManager Administration Guide.

Procedure

Step 1 In Cisco Unified CallManager Administration, delete the existing SIP phone from the Cisco Unified CallManager database.

Step 2 In Cisco Unified CallManager Administration, create the phone as an SCCP phone.

Step 3 Power cycle the phone.

Deploying a Phone in an SCCP and SIP Environment

To deploy Cisco Unified IP Phones in an environment that includes SCCP and SIP and in which the Cisco Unified CallManager Auto-Registration parameter is SCCP, perform these general steps:

1.Set the Cisco Unified CallManager auto_registration_protocol parameter to SCCP.

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones

OL-8148-01 2-17