Sony SLV-E580EE Specifications

50 Additional Information

Specifications

System

Channel coverage

VHS E2-E12, R1-R12

UHF E21-E69, R21-R69

CATV S1-S41, S01-S05

RF output signal

UHF channels 21 to 69

Aerial out

75-ohm asymmetrical aerial socket

Inputs and outputs

: LINE-1 (TV)

21-pin

Video input: pin 20

Audio input: pins 2 and 6

Video output: pin 19

Audio output: pins 1 and 3

LINE-2 IN

VIDEO IN, phono jack (1)

Input signal: 1 Vp-p, 75 ohms,

unbalanced, sync negative

AUDIO IN, phone jack (1)

Input level: 327 mVrms

Input impedance: more than 47 kilohms

LINE-2 OUT

AUDIO OUT, phono jack (2)

Rated output level: 327 mVrms

Load impedance: 47 kilohms

Output impedance: less than 10 kilohms

VIDEO OUT, phono jack (1)

Rated output: 327 mVrms

Load impedance: 47 kilohms

Output impedance: less than 10 kilohms

General

Power requirements

220 – 240 V AC, 50 Hz

Power consumption

23 W

Operating temperature

5°C to 40°C

Storage temperature

–20°C to 60°C

Dimensions

Approx. 430 × 100 × 314 mm (w/h/d)

including projecting parts and controls

Mass

Approx. 4.6 kg

Supplied accessories

Remote commander (1)

R6 (size AA) batteries (2)

Aerial cable (1)

Design and specifications are subject to change

without notice.

Contents

Main Introduction WARNING Precautions Safety Installing Caution Table of contents Getting Started Basic Operations Additional Operations Editing Page Step 2 Setting up the remote commander Inserting the batteries Using the remote commander Step 2 : Setting up the remote commander (continued) TV control buttons Controlling other TVs with the remote commander 1 2 Step 2 : Setting up the remote commander (continued) Connecting the VCR Step 3 1 2 3 Step 3 : Connecting the VCR (continued) Additional connections Step 4 Tuning your TV to the VCR 1 2 3 4 Step 4 : Tuning your TV to the VCR (continued) 5 6 7 Step 5 Setting up the VCR with the Auto Set Up function Step 6 Setting the clock select SETTINGS and press OK. 2 then press OK. 3 MENU OK CURSOR >/./?// MENU 4 set the month pressing CURSOR >/.. 5 6 7 Manual setup Selecting a language 2 3 Manual setup Presetting channels 2 3 Manual setup Presetting channels (continued) 4 () to CHANNEL SET. 5 position. 6 7 8 9 Disabling unwanted programme positions 1 1 2 3 4 5 Manual setup Presetting channels (continued) Playing a tape 1 2 3 Playing a tape (continued) Page 1 To record from a decoder, turn it on. in the display window. 2 3 4 5 6 Recording TV programmes (continued) 1 2 Basic Operations using the timer 1 2 3 4 1 2 3 Recording TV programmes using the timer (continued) Basic Operations Playing/searching at various speeds Using the shuttle ring Playing/searching at various speeds (continued) To resume normal playback Press PLAY. using the quick timer 1 2 Using the quick timer during stop mode Additional Operations36 Checking/ changing/ cancelling timer settings MENU Before you start Turn on your TV and set it to the video channel. CURSOR >/./?// CLEAR ON/STANDBY OK 3 4 5 Searching using the index function 1 2 Adjusting the picture Adjusting the tracking About Optimum Picture Control (OPC) Adjusting the picture (continued) Changing menu options 1 2 3 4 Changing menu options (continued) Connecting to a VCR or stereo system How to connect to record on this VCR How to connect to a stereo system Connecting to a VCR or stereo system (continued) Basic editing (when recording on this VCR) 1 2 3 4 Audio dubbing 1 2 3 4 5 Troubleshooting Symptoms caused by contaminated video heads 48 Troubleshooting (continued) Page Specifications System Inputs and outputs General Supplied accessories Index to parts and controls Front panel Display window Rear panel 54 Index to parts and controls (continued) Remote commander Page Index A, B C D E, F, G, H