Basic editing
(when recording on this VCR)
rREC
Before you start editing | P PAUSE |
|
•Turn on your TV and set it to the video channel.
•Press INPUT SELECT to display “L2” or “L1” in the display window.
•Press SP/LP to select the tape speed, SP or LP.
•On this VCR, set EDIT in the VIDEO OPTIONS menu to ON. If the other VCR has a similar function, turn it on also.
1Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.
2Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press P PAUSE.
3Press r REC on this VCR to set it to recording pause.
4To start editing, press the P PAUSE buttons on both VCRs at the same time.
To stop editing
Press the p STOP buttons on both VCRs.
Tips
•To edit more precisely, press the P PAUSE buttons on the VCRs to release pause.
•To cut out unwanted scenes while editing, press P PAUSE on this VCR when an unwanted scene begins. When it ends, press P PAUSE again to resume recording (Assemble Editing).
Note
•If you start editing following the procedure above, the VCR won’t start recording with the OPC function. To record a tape with the OPC function, press rREC again during recording pause in step 3 so the VCR analyses the tape. Then, when you start editing in step 4, press P PAUSE after the OPC indicator stops flashing. If you press P PAUSE before the OPC indicator stops flashing, the OPC function is cancelled.
Editing
45
