Sony SLV-E580EE manual Controlling other TVs with the remote commander, Display, Menu, Wide, Tip

To	Press
Use FASTEXT	FASTEXT buttons
Call up on-screen display	DISPLAY
Change the Teletext page	Ã/×
Operate TV menu options	MENU
	CURSOR >/./?//
	OK
Switch to/from wide mode of a Sony wide TV (For	WIDE
other manufacture’s wide TV, see “Controlling other
TVs with the remote commander” below.)

Notes

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery with an old one together.

•Do not use different types of batteries together.

Controlling other TVs with the remote commander

The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the table below, set the appropriate manufacturer’s code number.

1 Set TV / VIDEO at the top of the remote commander to TV .

2 Hold down ON/STANDBY, and enter your TV’s code number(s) using the programme number buttons. Then release ON/STANDBY.

Now you can use the following TV control buttons to control your TV: ON/STANDBY, TV/VIDEO, programme number buttons, ? (ten’s digit), PROG +/–, VOL +/–, ; (TV), V (Teletext), FASTEXT buttons, WIDE*, MENU*, CURSOR >/./?//*, and OK*.

* These buttons may not work with all TVs.

Tip

•When you set your TV’s code number correctly while the TV is turned on, the TV turns off automatically.

continued

Getting Started

Getting Started

7