Manual setup –– Presetting channels (continued)
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels clearly. If, however, the picture is not clear, you may also use the manual tuning function.
1 Press PROG +/– or the programme number buttons to select the programme number for which you cannot obtain a clear picture.
2
3
4
Press MENU, then select SETTINGS and press OK.
Select TUNER, then press OK.
Select FINE TUNING.
The fine tuning meter appears.
TUNER | PROG 4 | |
SYSTEM | [ D / K | ] |
NORMAL / CATV | [ NORM] | |
CHANNEL SET | [ C2 1 | ] |
AFT | [ OFF | ] |
FINE TUNING | – – – – – – – – |
| |
SELECT | : |
SET | : |
Selected programme position
5 Press CURSOR ?//to get a clearer picture, then press OK.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Note
•The menu disappears automatically if you don’t proceed for more than a few minutes.
20
Getting Started
