Manuals / Brands / TV and Video / VCR / Sony / TV and Video / VCR

Sony SLV-E580EE Using the shuttle ring

1 56

Download 56 pages, 631.75 Kb

Additional Operations 33

Using the shuttle ring

With the shuttle ring, you can operate a variety of playback options. There

are two ways for using the shuttle ring, normal mode and jog mode.

To use the shuttle ring in normal mode

During playback or pause, turn the shuttle ring clockwise or anticlockwise.

Each change in the shuttle ring position changes the playback mode in the

following way.

To use the shuttle ring in jog mode

Use this mode for frame-by-frame playback.

Press JOG to enter the jog mode. The JOG button lights up. If you change to

the jog mode during any playback mode, the playback pauses so you can see

a still picture. Each change in the shuttle ring position shifts the picture one

frame. To shift frames in reverse, turn the shuttle ring counterclockwise.

The frame shift speed depends on the speed you turn the shuttle ring.

To resume normal playback, press JOG again. The JOG indicator goes off.

Slow motion

in reverse

High speed

High speed

in reverse

Pause

Slow motion

Normal speed

(Initial speed)

Normal speed

in reverse

Double speed

in reverse Double speed

continued

Contents

Main Introduction WARNING Precautions Safety Installing Caution Table of contents Getting Started Basic Operations Additional Operations Editing Page Step 2 Setting up the remote commander Inserting the batteries Using the remote commander Step 2 : Setting up the remote commander (continued) TV control buttons Controlling other TVs with the remote commander 1 2 Step 2 : Setting up the remote commander (continued) Connecting the VCR Step 3 1 2 3 Step 3 : Connecting the VCR (continued) Additional connections Step 4 Tuning your TV to the VCR 1 2 3 4 Step 4 : Tuning your TV to the VCR (continued) 5 6 7 Step 5 Setting up the VCR with the Auto Set Up function Step 6 Setting the clock select SETTINGS and press OK. 2 then press OK. 3 MENU OK CURSOR >/./?// MENU 4 set the month pressing CURSOR >/.. 5 6 7 Manual setup Selecting a language 2 3 Manual setup Presetting channels 2 3 Manual setup Presetting channels (continued) 4 () to CHANNEL SET. 5 position. 6 7 8 9 Disabling unwanted programme positions 1 1 2 3 4 5 Manual setup Presetting channels (continued) Playing a tape 1 2 3 Playing a tape (continued) Page 1 To record from a decoder, turn it on. in the display window. 2 3 4 5 6 Recording TV programmes (continued) 1 2 Basic Operations using the timer 1 2 3 4 1 2 3 Recording TV programmes using the timer (continued) Basic Operations Playing/searching at various speeds Using the shuttle ring Playing/searching at various speeds (continued) To resume normal playback Press PLAY. using the quick timer 1 2 Using the quick timer during stop mode Additional Operations36 Checking/ changing/ cancelling timer settings MENU Before you start Turn on your TV and set it to the video channel. CURSOR >/./?// CLEAR ON/STANDBY OK 3 4 5 Searching using the index function 1 2 Adjusting the picture Adjusting the tracking About Optimum Picture Control (OPC) Adjusting the picture (continued) Changing menu options 1 2 3 4 Changing menu options (continued) Connecting to a VCR or stereo system How to connect to record on this VCR How to connect to a stereo system Connecting to a VCR or stereo system (continued) Basic editing (when recording on this VCR) 1 2 3 4 Audio dubbing 1 2 3 4 5 Troubleshooting Symptoms caused by contaminated video heads 48 Troubleshooting (continued) Page Specifications System Inputs and outputs General Supplied accessories Index to parts and controls Front panel Display window Rear panel 54 Index to parts and controls (continued) Remote commander Page Index A, B C D E, F, G, H