Chapter 55 Configuring a VoIP Network
Configuring VoIP on a Switch
Figure 55-6 Determining the Final Trust Value of a Port
QoS No Enabled
Port set to default QoS disabled setttings.
COPS | Yes | Port | COPS |
Enabled |
| Policy |
|
Port set to policy defined by COPS server/role.
No
Local
Type
None
Port set to QoS parameters as defined per the configuration
ciscoipphone
CDP Enabled on No
Port
Yes
IP Phone Yes
Persent on
Port
No
Port trust state set to untrusted, other QoS parameters set per the configuration.
68899
Configuring a Trusted Boundary
These sections describe how to configure the trusted boundary feature:
•Default Configuration, page
•Specifying a Cisco IP Phone as the Trust Device, page
•Verifying a Port’s
| Catalyst 6500 Series Switch Software Configuration |
|