Chapter 55 Configuring a VoIP Network
Using SmartPorts
Displaying Macros
This section describes the various methods of displaying macros:
•The syntax is as follows:
show macro name name_of_macro show macro all
•Display the definition of a macro by entering the show macro name name_of_macro command as follows:
Console> (enable) show macro name videophone
The macro definition for videophone is:
set port | enable #MODPORT | |
set | vlan | $DATAVLAN #MODPORT |
set | port | auxiliaryvlan #MODPORT $AUXVLAN |
Console> | (enable) |
•Display the names of all the macros in the switch by entering the show macro all command as follows:
Console> (enable) show macro all Macro Names
fileserver videophone Console> (enable)
Displaying Macro Variables
This section describes the various methods of displaying macro variables:
•The syntax is as follows:
show macro variable [all] [name name_of_macro] [mod/port] show macro variables name name_of_macro mod/port
•Display all the macro variables in the switch by entering the show macro variable all command as follows:
Console> (enable) show macro variable all
Variable | Port | Value | Type |
DATAVLAN | 3/2 | 3 | |
DATAVLAN | 3/3 | 5 | |
DATAVLAN | NA | 99 | Global |
AUXVLAN | 3/2 | 4 | |
AUXVLAN | 3/7 | 77 | |
CDPVER | NA | v2 | Global |
Console> (enable) |
|
|
|
| Catalyst 6500 Series Switch Software Configuration |
|