Chapter 55 Configuring a VoIP Network
Using SmartPorts
SmartPorts Enhancements in Software Release 8.4(1)
These sections describe the SmartPorts enhancements in software release 8.4(1):
•Ciscorouter SmartPorts Template, page
•Ciscoswitch SmartPorts Template, page
•Ciscodesktop SmartPorts Template, page
•Ciscoipphone SmartPorts Template, page
•Ciscosoftphone SmartPorts Template, page
•Global SmartPorts Template, page
Ciscorouter SmartPorts Template
The ciscorouter interface macro command results in the following configuration:
Note Specifying the nativevlan is required. Specifying the allowedvlans is optional.
set port macro mod/port ciscorouter nativevlan nativevlan allowedvlans vlans
set port enable mod/port
set vlan nativevlan mod/port
set port auxiliaryvlan mod/port auxvlan none set port inlinepower mod/port auto
set cdp enable mod/port
set port membership mod/port static
set port
set spantree portfast mod/port enable trunk set spantree
If the allowedvlans parameter is not specified, the following configuration is used:
set trunk mod/port
If the allowedvlans parameter is specified, the following configuration is used:
set trunk mod/port none
set trunk mod/port vlans (if specified)
set port qos mod/port autoqos trust dscp
| Catalyst 6500 Series Switch Software Configuration |
|