9-15
Cisco Wireless LAN Controller Configuration Guide
OL-9141-03
Chapter9 Managing User Accounts
Choosing the Web Authentication Login Window
You can download a sample login page from Cisco WCS and use it as a starting point for your
customized login page. Refer to the “Downloading a Customized Web Auth Page” section in the Using
Templates chapter of the Cisco Wireless Control System Configuration Guide, Release 4.0 for
instructions.
If you want to download a customized web authentication login window to the controller, follow the
instructions in the GUI or CLI procedure below.
Using the GUI to Download a Customized Web Authentication Login Window
Step 1 Make sure that you have a TFTP server available for the file download. See the guidelines for setting up
a TFTP server in Step8 of the “Using the CLI to Choose the Default Web Authentication Login
Window” section on page9-10.
Step2 Copy the .tar file containing your login page to the default directory on your TFTP server.
Step3 Click Commands > Download File to access the Download File to Controller page (see Figure 9-13).
Figure9-13 Download File to Controller Page
Step4 From the File Type drop-down box, choose Webauth Bundle.
Step5 In the IP Address field, enter the IP address of the TFTP server.
Step6 In the Maximum Retries field, enter the maximum number of times the controller should attempt to
download the .tar file.
Range: 1 to 254
Default: 10
Step7 In the Timeout field, enter the amount of time in seconds before the controller times out while attempting
to download the *.tar file.
Range: 1 to 254 seconds
Default: 6 seconds
Step8 In the File Path field, enter the path of the .tar file to be downloaded. The default value is “/.”
Step9 In the File Name field, enter the name of the .tar file to be downloaded.
Step10 Click Download to download the .tar file to the controller.
Step11 Click Security > Web Login Page to access the Web Login page.
Step12 From the Web Authentication Type drop-down box, choose Customized (Downloaded).