Cisco Systems OL-9141-03 Creating Guest User Accounts as a Lobby Ambassador

9-4

Cisco Wireless LAN Controller Configuration Guide

OL-9141-03

Chapter9 Managing User Accounts

Creating Guest User Accounts

Enter this command to create a lobby ambassador account using the controller CLI:

config mgmtuser add lobbyadmin_username lobbyadmin_pwd lobby-admin

Note Replacing lobby-admin with read-only creates an account with read-only privileges. Replacing

lobby-admin with read-write creates an administrative account with both read and write privileges.

Creating Guest User Accounts as a Lobby Ambassador

A lobby ambassador would follow these steps to create guest user accounts.

Note A lobby ambassador cannot access the controller CLI interface and therefore can create guest user

accounts only from the controller GUI.

Step1 Log into the controller as the lobby ambassador, using the username and password specified in the

“Creating a Lobby Ambassador Account” section above. The Lobby Ambassador Guest Management >

Guest Users List page appears (see Figure 9-3).

Figure9-3 Lobby Ambassador Guest Management > Guest Users List Page

Step2 Click New to create a guest user account. The Lobby Ambassador Guest Management > Guest Users

List > New page appears (see Figure 9-4).

Figure9-4 Lobby Ambassador Guest Management > Guest Users List > New Page