Chapter 5 Ethernet Cards
5.7.1 ML1000-2 Card-Level Indicators
Figure 5-6shows the ML1000-2 card faceplate.
Figure 5-6 ML1000-2 Faceplate
ML1000
2
FAIL
ACT
CONSOLE
TX 1 RX
LINK
ACT
TX 2 RX
LINK
ACT
83648
ML-Series cards feature two SDH virtual ports with a maximum combined bandwidth of VC4-16c. Each port carries an STM circuit with a size of VC3, VC4, VC4-2c, VC4-3c, VC4-4c, and VC4-8c. For step-by-step instructions on configuring an ML-Series card SDH STM circuit, refer to the “Create Circuits and Tunnels” chapter of the Cisco ONS 15454 SDH Procedure Guide.
The ML-Series POS ports supports VCAT of SONET/SDH circuits and a software link capacity adjustment scheme (SW-LCAS). The ML-Series card supports a maximum of two VCAT groups with each group corresponding to one of the POS ports. Each VCAT group must be provisioned with two circuit members. An ML-Series card supports VC-3-2v, VC-4-2v and VC-4-4c-2v. For step-by-step instructions on configuring an ML-Series card SDH VCAT circuit, refer to the “Create Circuits and Tunnels” chapter of the Cisco ONS 15454 SDH Procedure Guide.
5.7.1 ML1000-2 Card-Level Indicators
The ML1000-2 card faceplate has two card-level LED indicators, described in Table 5-13.
Cisco ONS 15454 SDH Reference Manual, R5.0