Chapter 2 Quick Installation Procedures

Common Installation Procedures

To ground the shelf, follow these steps:

Step 1 Use a wire-stripping tool to remove approximately 0.75 inch (20 mm) of the covering from the end of the grounding wire.

Step 2 Insert the stripped end of the grounding wire into the open end of the grounding lug.

Step 3 Use the crimping tool to secure the grounding wire in place in the grounding lug.

Step 4 Locate the grounding receptacle on the chassis.

Step 5 Remove the label that covers the grounding receptacle.

Note Step 6 is optional if you are not using the top cable management guide.

Step 6 Place the lug mounting adapter against the grounding receptacle at the top of the chassis.

Step 7 Place the grounding lug against the lug mounting adapter.

Step 8 Insert two screws through the holes in the grounding lug and the grounding receptacle. Ensure that the grounding lug does not interfere with other hardware or rack equipment.

Step 9 Install the locking washers and nuts; tighten them to secure the grounding lug to the grounding receptacle.

Step 10 Prepare the other end of the grounding wire and connect it to an appropriate grounding point in your site to ensure adequate earth ground for the Cisco ONS 15540.

Cleaning the Shelf

Be careful with the airflow system when you clean the chassis. If the cleaning process must be done while the system is running, be aware that the airflow system is in operation. Clean the chassis with a damp cloth only and be careful of the following:

•Do not touch the airflow system while fans are operating.

•Do not use wet tissues for cleaning the chassis.

•Do not use any harsh or abrasive cleaning agents.

Warning Invisible laser radiation might be emitted from the end of the fiber or connector. Do not stare into the beam or view directly with optical instruments.

Cleaning Optical Connectors

When installing your optical connectors, consider the following issues:

•Dirty optical connectors are a common source of light loss. Keep the connectors clean at all times and keep the dust cover installed when not in use.

•Before installing any type of cable or connector, use a lint-free alcohol pad from a cleaning kit to clean the ferrule, the protective white tube around the fiber, and the end-face surface of the fiber.

•As a general rule, whenever there is a significant, unexplained loss of light, clean the connectors.

Optical Transport Turn-Up and Test Guide

2-28

78-14964-01

 

 

Page 27 Page 29
Page 28
Image 28
Cisco Systems ONS 15540 installation instructions Cleaning the Shelf, Cleaning Optical Connectors
Page 27 Page 29

ONS 15540 specifications

Cisco Systems ONS 15540 is a high-capacity Optical Network System that plays a vital role in modern telecommunications by providing scalable and reliable transport solutions for service providers. Designed to accommodate the rapidly increasing demand for bandwidth, the ONS 15540 allows for seamless integration of voice, video, and data services over a single network infrastructure.

One of the standout features of the ONS 15540 is its ability to support both SONET (Synchronous Optical Network) and SDH (Synchronous Digital Hierarchy) protocols, enabling interoperability between different equipment and networks. This compatibility makes it an attractive solution for carriers looking to optimize their existing infrastructure while also preparing for future growth. The system is capable of delivering line rates of up to 40 Gbps, making it suitable for high-traffic environments.

The ONS 15540 employs advanced wavelength division multiplexing (WDM) technology, which allows multiple data streams to be transmitted simultaneously over a single optical fiber. This capability maximizes the utilization of existing fiber resources and significantly increases bandwidth availability. The system supports both CWDM (Coarse Wavelength Division Multiplexing) and DWDM (Dense Wavelength Division Multiplexing) configurations, offering flexibility to meet diverse network needs.

Another significant characteristic of the ONS 15540 is its modular architecture. This design enables service providers to easily upgrade and expand their systems by adding new line cards or service modules without significant disruption. The ONS 15540 accommodates various types of interfaces, including Ethernet, TDM, and video, ensuring the system can support a wide range of applications.

In addition to its hardware features, the ONS 15540 includes sophisticated management capabilities through Cisco's comprehensive management tools. These tools allow network operators to monitor performance, provision new services, and perform troubleshooting efficiently. With built-in redundancy and fault-tolerant features, the system ensures high availability and reliability, critical for service providers that require 24/7 operation.

In summary, the Cisco Systems ONS 15540 optical networking system provides a robust solution for carriers seeking to enhance their network capacity and flexibility. With its support for multiple protocols, advanced WDM technology, modular architecture, and management capabilities, the ONS 15540 stands out as a powerful asset for meeting the demands of today’s communication landscape.
Top Page Image Contents