Cisco IOS for S/390 Unprefixed Messages and Codes
T01CF084W
Refresh of USSTAB failed, tbl_name not used in APP task task_num
Explanation There was a negative response to REFRESH USSTAB(tbl_name) TASK(task_num) operator command. tbl_name for APP task task_num was not specified in the active APPCFGxx SERVICE segment.
Recommended Action Check the spelling of tbl_name and APP task task_num that may have been entered correctly.
T01NT069I
HH:MM:SS - nnn active TCP connections
T01NT070I
LNI aaaaaaaa : bbb / ccc bytes/packdts in, at ddd bytes/sec
Syntax Description
aaaaaaaa | Hardware interface name |
bbbb | Total byte count. |
cccTotal packet count.
dddRate based on the time difference from the last sampling.
T01NT071I
LNI aaaaaaaa: bbb/ccc/ bytes/packets out, at ddd bytes/sec
Syntax Description
aaaaaaaa | Hardware interface name |
bbbbTotal byte count.
ccccTotal packet count.
ddd | Rate based on the time difference from the last sampling. |
|
|
Cisco IOS for S/390 Unprefixed Messages and Codes
The information in this section should be added to the Cisco IOS for S/390 Unprefixed Messages and Codes manual.
C245xxxx (07xx) T012TCLS
The following table replaces Table 60 “X’C245’ Instance Codes” in the “API Diagnostic Codes” chapter:
Table 6 | X’C245’ Instance Codes | |
|
|
|
Description | ||
|
|
|
C2450001 | 0701 | Unexpected abend |
|
|
|
Cisco IOS for S/390 Release 2.0 Release Notes 19
