Product Changes
•
•
•
As for parameters in the Cisco IOS for S/390 Release 1.0 configuration member APICFG00, the TPCB was replaced with the SPCB. You will only need 3 (default) because there are only 3 API's.
CBUFs were replaced with the set of MBUFs. Previously, there were two CBUFs per session, one for input and one for output. Now all data is buffered in MBUFs, so there is no relation between the size of the CBUF pool, and the sizes of the MBUF pools. Pool sizes are based on the amount of data buffered, not on the number of endpoints.
In Cisco IOS for S/390 Release 2.0, usage of the API is no longer limited, so there was no need for the (1.0) API statement.
The APP task group may have up to four tasks for parallel processing.
The SSN parameter of member ACPCFG00 is now in the startup JCL.
The startup JCL has the following changes:
—WTPLOG11, WTPLOG12, WTPLOG13, and ACLOG DD statements have been replaced by T01LOG
—T01LOG DD SYSOUT=&SOUT has been added
—ACSNAP DD statements have been removed
—PRFX=ACS parameter on the EXEC statement has changed to PRFX=T01
—CNFG parameter has been added to the EXEC statement.
•The following pools that were in Cisco IOS for S/390 release 1.0 are not in Cisco IOS for S/390 release 2.0:
—ARCB
—CBUF
—EPCB
—SRE
—TPCB
—TSQB
—TUCB
•The NETSTAT RTM (Recovery and Termination Manager) function is no longer supported. NETSTAN CONN COUNT and NETSTAT CNFG LNI provide similar information
•
•
The NETSTAT WTOLOG function is no longer supported.
The LOGSTAMP feature and task is no longer provided. All messages in the T01LOG are timestamped.
Cisco IOS for S/390 Release 2.0 Release Notes 5
