10
Cisco SFS 3504 Multifabric Server Switch Installation and Configuration Note
78-18335-01
Installing the Cisco SFS 3504 Server Switch
Figure5 Sliding the Cisco SFS 3504 Server Switch Between Rack Posts and Inserting Brackets
Step5 Slide the two adjustable brackets, from the back, between each of the guide rails that are attached on
either side of the Cisco SFS 3504 Server Switch at the power-fan modules end. (See Figure5.)
Step6 Adjust the adjustable brackets so that the holes in the brackets align with the holes in the rack posts, and
secure the adjustable brackets to the rack posts. (See Figure 5.)
Use four standard rack screws (two for each bracket; rack screws not included in the accessory kit) to
secure the adjustable brackets to the rear rack posts.
241650
Cisco SFS3504 Multifabric Switch
!
OK
123456789101112
TX/RX
Link
D
SFS3500 Series FC Gateway
!
OK
1234
Fault
Link
SFS3500 Series Ethernet Gateway
!
OK
123456
TX/RXLink
100/1000Base T